Building the pedigrees

Until pedigrees are built/inferred, there is not much information available (e.g. about children). So let us infer the pedigrees:

pedigrees <- build_pedigrees(sim_res$population, progress = FALSE)
pedigrees

## List of 2 pedigrees (of size 38, 10)

pedigrees_count(pedigrees)

## [1] 2

pedigrees_table(pedigrees)

## 10 38 
##  1  1

pedigree_size(pedigrees[[1]])

## [1] 38

pedigree_size(pedigrees[[2]])

## [1] 10

#pedigree_size(pedigrees[[3]]) # error as there are only 2 pedigrees

The pedigrees can be plotted all at once:

plot(pedigrees)

Or just one at a time:

plot(pedigrees[[1]])

plot(pedigrees[[2]])

Some information about the population can be obtained. For example, the individuals in the final generation can be saved:

str(sim_res, 1)

## List of 7
##  $ population                :Classes 'malan_population', 'externalptr' <externalptr> 
##  $ generations               : num 10
##  $ founders                  : int 2
##  $ growth_type               : chr "ConstantPopulationSize"
##  $ sdo_type                  : chr "StandardWF"
##  $ end_generation_individuals:List of 10
##  $ individuals_generations   :List of 23
##  - attr(*, "class")= chr [1:2] "malan_simulation" "list"

live_individuals <- sim_res$end_generation_individuals

And a live individual is printed:

print_individual(live_individuals[[1]])

##   pid = 1 with father pid = 11 and no children

We can also print another individual (from the entire population):

indv <- get_individual(sim_res$population, 22)
print_individual(indv)

##   pid = 22 with father pid = 28 and children (n = 2): 
##     pid = 16 with father pid = 28 and 2 children
##     pid = 14 with father pid = 28 and 2 children

Run a mutation process

set.seed(1)

mutrts <- c(0.5, 0.5)
pedigrees_all_populate_haplotypes(pedigrees = pedigrees, 
                                  loci = length(mutrts), 
                                  mutation_rates = mutrts, progress = FALSE)

Individual pedigrees can now be plotted with haplotype information:

plot(pedigrees[[1]], haplotypes = TRUE)

And the individual id can be removed to only display the haplotype:

plot(pedigrees[[1]], ids = FALSE, haplotypes = TRUE)

And one or more individuals can be marked/highlighted:

plot(pedigrees[[1]], ids = TRUE, haplotypes = TRUE, mark_pids = c(14, 16))

More than 1 full generation

By standard, only the last generation contains N individuals. If the 3 last generations should be full, this can be done by specifying generations_full = 3 as follows:

set.seed(1)
sim_res <- sample_geneology(population_size = 10, 
                            generations = 5, 
                            generations_full = 3,
                            progress = FALSE)
pedigrees <- build_pedigrees(sim_res$population, progress = FALSE)
plot(pedigrees)

And to obtain the complete history, generations_full is set to generations:

set.seed(1)
sim_res <- sample_geneology(population_size = 10, 
                            generations = 5, 
                            generations_full = 5,
                            progress = FALSE)
pedigrees <- build_pedigrees(sim_res$population, progress = FALSE)
plot(pedigrees)

Now, there are 10 individuals in all generations.

Simulate to one founder

By standard, the number of generations are specified. Instead, it can be specified to continue simulating until one common founder is reached by specifying generations = -1:

set.seed(1)
sim_res <- sample_geneology(population_size = 10, 
                            generations = -1, 
                            progress = FALSE)
pedigrees <- build_pedigrees(sim_res$population, progress = FALSE)
plot(pedigrees)

The number of generations needed can be obtained as follows:

sim_res$generations

## [1] 15

Simulating the population

Let’s try to simulate a larger population with 3 full generations (the additional generations_return is to get all individuals in the last 3 generations returned in the individuals_generations slot, cf. below):

set.seed(1)
sim_res <- sample_geneology(population_size = 1e3, 
                            generations = 200, 
                            generations_full = 3,
                            generations_return = 3, # default value
                            progress = FALSE)

And build the pedigrees:

pedigrees <- build_pedigrees(sim_res$population, progress = FALSE)
pedigrees_table(pedigrees)

##  311  736 2464  407  758 1421 2565 2740 
##    1    1    1    1    1    1    1    1

pedigrees_count(pedigrees)

## [1] 8

So there are 8 pedigrees. Let’s try to plot the largest one:

ped_sizes <- sapply(1L:pedigrees_count(pedigrees), function(i) pedigree_size(pedigrees[[i]]))
ped_sizes

## [1] 2740 2565 2464 1421  758  736  407  311

largest_i <- which.max(ped_sizes)
plot(pedigrees[[largest_i]])

And the impose mutations from a 20 locus haplotype with mutation rate 0.001 per locus:

set.seed(10)
mutrts <- rep(0.001, 20)
pedigrees_all_populate_haplotypes(pedigrees = pedigrees, 
                                  loci = length(mutrts), 
                                  mutation_rates = mutrts, progress = FALSE)

The haplotypes at the live individuals (3 generations) can be inspected:

live_individuals <- sim_res$individuals_generations
length(live_individuals)

## [1] 3000

haps <- get_haplotypes_individuals(individuals = live_individuals)

head(haps)

##      [,1] [,2] [,3] [,4] [,5] [,6] [,7] [,8] [,9] [,10] [,11] [,12] [,13] [,14]
## [1,]    0    0    0    0   -1   -1    0    0    0     1     1     0     0     0
## [2,]    0    0    0    0   -1    0    0    0   -1     0    -1     0     0     0
## [3,]    0    0    0    0    0    0    0    0    0     0     0     0     0     0
## [4,]    0    0    0    0    0    0    0    0    0     0     0     1     0     0
## [5,]    0    0    0    0    0    0    0    0    0     0     0     0     0     2
## [6,]    0   -1    0   -1    0    0    0    0   -1     0     0     1     0     0
##      [,15] [,16] [,17] [,18] [,19] [,20]
## [1,]     0     0     0     0     0     0
## [2,]     0     0     0     0     0     0
## [3,]     0     0     0     0     0     0
## [4,]     0     0     0     0     0     0
## [5,]     0     0     0     0     0    -1
## [6,]     1     0     0     0     0     0

Lets look at the spectrum:

haps_str <- apply(haps, 1, paste0, collapse = ";")
haps_tab <- table(haps_str)
sort(haps_tab, decreasing = TRUE)[1:10]

## haps_str
##   0;0;-1;0;0;0;0;0;0;0;0;0;0;0;-1;0;0;0;0;0 
##                                         215 
##    0;0;0;0;-1;0;0;0;0;1;1;0;0;0;0;0;0;0;0;0 
##                                         164 
## 0;0;-1;0;0;0;0;0;0;-1;-1;0;0;0;0;-1;0;0;0;0 
##                                         152 
##    1;1;0;0;0;0;0;0;0;1;0;0;0;-1;0;0;0;0;0;0 
##                                         126 
##     0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0 
##                                         112 
##     0;0;0;0;0;0;0;0;0;0;0;1;0;0;0;0;0;0;0;0 
##                                         111 
##    0;0;0;0;0;0;0;0;0;0;0;0;0;2;0;0;0;0;0;-1 
##                                          92 
##   0;0;0;0;0;0;0;-1;0;-2;0;0;0;0;0;0;0;0;0;0 
##                                          90 
##  0;0;0;0;-1;0;0;0;-1;0;-1;0;0;0;0;0;0;0;0;0 
##                                          82 
##   0;0;0;0;0;0;0;0;-1;0;0;0;0;0;-1;0;0;0;0;0 
##                                          80

spectrum <- table(haps_tab)
spectrum

## haps_tab
##   1   2   3   4   5   6   7   8   9  10  11  12  13  14  15  16  17  18  19  20 
##  37  19   9  13  11   3   2   5   3   3   2   3   2   6   1   2   2   4   1   1 
##  21  22  23  24  29  30  32  33  35  40  41  42  43  46  52  54  58  59  60  74 
##   2   4   1   1   3   1   1   2   1   2   1   2   1   1   1   1   1   1   1   1 
##  80  82  90  92 111 112 126 152 164 215 
##   1   1   1   1   1   1   1   1   1   1

Drawing an individual and counting matches

set.seed(100)
Q_index <- sample.int(n = length(live_individuals), size = 1)
Q <- live_individuals[[Q_index]]
Q_hap <- get_haplotype(Q)
Q_hap

##  [1]  0  0  0  0 -1  0  0  0 -1  0 -1  0  0  0  0  0  0  0  0  0

First, identify Q’s pedigree:

Q_ped <- get_pedigree_from_individual(Q)

Now, count matches in pedigree and in live population:

count_haplotype_occurrences_pedigree(pedigree = Q_ped, haplotype = Q_hap, generation_upper_bound_in_result = 2)

## [1] 82

count_haplotype_occurrences_individuals(individuals = live_individuals, haplotype = Q_hap)

## [1] 82

We can also inspect pedigree matches information about number of meioses and L₁ distances:

path_details <- pedigree_haplotype_matches_in_pedigree_meiosis_L1_dists(suspect = Q, 
                                                                        generation_upper_bound_in_result = 2)

nrow(path_details)

## [1] 82

head(path_details)

##      meioses max_L1  pid
## [1,]       8      0 2697
## [2,]       8      0 2299
## [3,]       9      0 1780
## [4,]       8      0 2119
## [5,]       9      0 1687
## [6,]       9      0 1544

Look at the distribution of number of meioses between Q and the matches (there are 0 meioses between Q and himself):

meioses <- path_details[, 1]
hist(meioses)

On the path between Q and the match, the maximum L₁ difference between Q’s haplotype and the haplotypes of the individuals on the path is recorded (0 means that that no mutations have occured on the path between Q and the match):

L1_max <- path_details[, 2]
table(L1_max)

## L1_max
##  0 
## 82

mean(L1_max == 0)

## [1] 1

Mixtures

Draw true contributors:

set.seed(100)
U_indices <- sample.int(n = length(live_individuals), size = 2, replace = FALSE)
U1 <- live_individuals[[U_indices[1]]]
U2 <- live_individuals[[U_indices[2]]]
H1 <- get_haplotype(U1)
H2 <- get_haplotype(U2)

View haplotypes:

rbind(H1, H2)

##    [,1] [,2] [,3] [,4] [,5] [,6] [,7] [,8] [,9] [,10] [,11] [,12] [,13] [,14]
## H1    0    0    0    0   -1    0    0    0   -1     0    -1     0     0     0
## H2    0   -1    0   -1    0    0    0    0   -1     0     0     1     0     0
##    [,15] [,16] [,17] [,18] [,19] [,20]
## H1     0     0     0     0     0     0
## H2     1     0     0     0     0     0

Now, find those haplotype in live individuals (those haplotypes are in haps from before) that are included in (or compatible with) the mixture:

#mixres <- indices_in_mixture_by_haplotype_matrix(haplotypes = haps, H1 = H1, H2 = H2)
mixres <- mixture_info_by_individuals_2pers(live_individuals, U1, U2)
str(mixres, 1)

## List of 13
##  $ pids_included_in_mixture     : int [1:293] 2 6 20 38 41 52 59 72 77 79 ...
##  $ pids_included_in_mixture_info:List of 293
##  $ pids_matching_donor1         : int [1:82] 2 77 95 142 150 168 236 237 251 259 ...
##  $ pids_matching_donor2         : int [1:40] 6 20 38 79 147 321 729 761 802 1006 ...
##  $ pids_others_included         : int [1:171] 41 52 59 72 124 282 294 308 311 313 ...
##  $ pids_donor12_meiotic_dist    : int -1
##  $ donor1_family_info           :List of 5
##  $ donor2_family_info           :List of 5
##  $ donor1_profile               : int [1:20] 0 0 0 0 -1 0 0 0 -1 0 ...
##  $ donor2_profile               : int [1:20] 0 -1 0 -1 0 0 0 0 -1 0 ...
##  $ donor1_pid                   : int 503
##  $ donor2_pid                   : int 2035
##  $ loci_not_matching            : num 6

Compare with matches:

length(mixres$pids_matching_donor1)

## [1] 82

count_haplotype_occurrences_individuals(individuals = live_individuals, haplotype = H1)

## [1] 82

length(mixres$pids_matching_donor2)

## [1] 40

count_haplotype_occurrences_individuals(individuals = live_individuals, haplotype = H2)

## [1] 40

In mixture that are not H1 and not H2:

length(mixres$pids_others_included)

## [1] 171

Inspect these (only unique ones):

others_haps <- get_haplotypes_pids(sim_res$population, mixres$pids_others_included)
others_haps <- others_haps[!duplicated(others_haps), ]
others_haps

##      [,1] [,2] [,3] [,4] [,5] [,6] [,7] [,8] [,9] [,10] [,11] [,12] [,13] [,14]
## [1,]    0    0    0   -1    0    0    0    0   -1     0     0     0     0     0
## [2,]    0    0    0    0    0    0    0    0   -1     0     0     0     0     0
## [3,]    0    0    0   -1    0    0    0    0   -1     0     0     1     0     0
## [4,]    0    0    0   -1   -1    0    0    0   -1     0     0     0     0     0
##      [,15] [,16] [,17] [,18] [,19] [,20]
## [1,]     0     0     0     0     0     0
## [2,]     0     0     0     0     0     0
## [3,]     1     0     0     0     0     0
## [4,]     0     0     0     0     0     0

And get their population counts:

others_haps_counts <- unlist(lapply(seq_len(nrow(others_haps)), function(hap_i) {
            count_haplotype_occurrences_individuals(individuals = live_individuals, 
                                                    haplotype = others_haps[hap_i, ])
          }))
sum(others_haps_counts)

## [1] 171

length(mixres$pids_others_included)

## [1] 171

Compare with profiles of true contributors:

rbind(H1, H2)

##    [,1] [,2] [,3] [,4] [,5] [,6] [,7] [,8] [,9] [,10] [,11] [,12] [,13] [,14]
## H1    0    0    0    0   -1    0    0    0   -1     0    -1     0     0     0
## H2    0   -1    0   -1    0    0    0    0   -1     0     0     1     0     0
##    [,15] [,16] [,17] [,18] [,19] [,20]
## H1     0     0     0     0     0     0
## H2     1     0     0     0     0     0

Variance in number of children

Let α be the parameter of a symmetric Dirichlet distribution specifying each man’s probability to be the father of an arbitrary male in the next generation. When α = 5, a man’s relative probability to be the father has 95% probability to lie between 0.32 and 2.05, compared with a constant 1 under the standard Wright-Fisher model and the standard deviation in the number of male offspring per man is 1.10 (standard Wright-Fisher = 1).

This symmetric Dirichlet distribution is implemented by drawing father (unscaled) probabilities from a Gamma distribution with parameters shape and scale that are then normalised to sum to 1. To obtain a symmetric Dirichlet distribution with parameter α, the shape must be α and scale 1/α. This is simulated as follows (note the enable_gamma_variance_extension parameter):

dirichlet_alpha <- 5

set.seed(1)
sim_res <- sample_geneology(population_size = 10, 
                            generations = 10, 
                            enable_gamma_variance_extension = TRUE,
                            gamma_parameter_shape = dirichlet_alpha,
                            gamma_parameter_scale = 1 / dirichlet_alpha,
                            progress = FALSE)
pedigrees <- build_pedigrees(sim_res$population, progress = FALSE)

plot(pedigrees)

Let us verify the claim that the standard deviation in the number of male offspring per man is 1.10. The easiest way is to get information about father id’s, which is done by asking for a verbose_result:

N <- 1000

set.seed(1)
sim_res <- sample_geneology(population_size = N, 
                            generations = 2, 
                            enable_gamma_variance_extension = TRUE,
                            gamma_parameter_shape = dirichlet_alpha,
                            gamma_parameter_scale = 1/dirichlet_alpha,
                            progress = FALSE, verbose_result = TRUE)

tbl_fathers_with_children <- table(sim_res$father_pids[, 1])
tbl_fathers_no_children <- rep(0, N - length(tbl_fathers_with_children))

number_of_children <- c(tbl_fathers_with_children, tbl_fathers_no_children)
number_of_children <- as.numeric(number_of_children)

mean(number_of_children)

## [1] 1

sd(number_of_children)

## [1] 1.11411

Let os get estimates in parallel:

get_number_children <- function(N) {
  sim_res <- sample_geneology(population_size = N, 
                              generations = 2, 
                              enable_gamma_variance_extension = TRUE,
                              gamma_parameter_shape = dirichlet_alpha,
                              gamma_parameter_scale = 1 / dirichlet_alpha,
                              progress = FALSE, verbose_result = TRUE)
  
  tbl_fathers_with_children <- table(sim_res$father_pids[, 1])
  tbl_fathers_no_children <- rep(0, N - length(tbl_fathers_with_children))
  
  number_of_children <- c(tbl_fathers_with_children, tbl_fathers_no_children)
  number_of_children <- as.numeric(number_of_children)
  
  return(number_of_children)
}

library(parallel)
options(mc.cores = 2)
RNGkind("L'Ecuyer-CMRG") # for mclapply
set.seed(1)
x <- mclapply(1:100, function(i) get_number_children(100))
sds <- unlist(lapply(x, sd))
mean(sds)

## [1] 1.100545

Population growth

Population growth can be simulated by specifying the population size at each generation by the population_sizes vector, where the length thus specifies the number of generations:

set.seed(1)
sim_res_growth <- sample_geneology_varying_size(population_sizes = c(10, 20, 10), 
                                                generations_full = 3, 
                                                progress = FALSE)

Note how generations_full was used to obtain all individuals in the generations (and not just those with descendants in the last two):

pedigrees_growth <- build_pedigrees(sim_res_growth$population, progress = FALSE)

plot(pedigrees_growth)